Wednesday, November 24, 2010

Oh man! What was I thinking.

When school started this fall I began my first chemistry class in who knows how long and we, as a class, were given the assignment of a class presentation with our lab partner. Not giving it much thought I mentioned to my lab partner all the supplies I had for making soap at my house and that we should make soap for our presentation. Sounds harmless enough, right?

In all innocence, we began the process on a Saturday morning. We drove all over the metropolis of Hurricane, UT and tried to gather the final supplies we needed. A glass measuring cup, a huge plastic bowl, a wire whisk. You get the picture. We get back to my house about a half hour later and begin laying out the supplies and documenting (pictures, measurements, etc). Everything that I had read on the subject said that for a solid soap to use sodium hydroxide. Of course I went Wal-mart to find such a substance and purchased it about two months before we actually did our project. Wal-mart has everything a person could possibly need right? I was a little concerned when I read the label and it said "Contains sodium hydroxide" instead of having an ingredient list of just sodium hydroxide. I emailed the questions and comments email address for the Helen Johnson Co. at that time but never heard back from them. (How efficient of the Helen Johnson Co). So being the mad chemist that I am, the decision to move forward was made (in my own head).

Preying on the innocent, I had my lab partner add the drano to the water while I took pictures. Oddly enough the mixture began to turn green and bubble, and violently start to boil. The foam that formed on the top of the mixture was about to come over the top of the glass pitcher and the look on my lab partners face was classic. We let the mixture die down a little bit, took some pictures and my lab partner went to the hardware store to see if he could find some real lye (sodium hydroxide). He says you can find anything at the hardware store and sure enough he was successful and came back with lye and gloves. Obviously he was thinking ahead at this point.

We started over, adding the lye to the water. No violent boiling this time. So far so good. When the lye came to temperature he put it in with the solid oils. The bowl was really full but there was enough room for now. We still had the liquid oils to add but we weren't so concerned with that at the moment. He continued to stir the mixture when all the sudden there was a hole in the bowl. The mixture was leaking down the table and onto the floor. I let out a shrieking scream and the next thing I knew the other side of the bowl also had a hole and was leaking all over the middle of the table. We grabbed a bucket and put everything in it. My lab partner ran outside with it while Jeff and I tried to get everything off the table. We went outside and poured the mixture back into a bowl...stainless steel this time. After going back inside we again realized that there was not enough room in this bowl either and we got two more bowls out. The next 2 1/2 hours were spent with wire whisks and the glass picture, pouring from one bowl to another. After all this time and knowing that my lab partner had other things to do I decided to donate my blender to the cause. We added four cups at a time and finally got the mixture to thicken after about a minute. After about 15 minutes we were finally pouring the soap into the molds and alas it was complete.
As we analyzed what had just happened we came to the following conclusions:
1. Drano is evil and is not pure sodium hydroxide.
2. Never, and I mean never, buy a plastic bowl to make soap at the dollar store.
3. Always, and I mean always, know how much you are making.
4. Although it sucks to not be able to use my blender again for food, a blender is a necessary sacrifice for a project like this.
5. After all the damage, (ie. varnish removed and burned table top, lab partners shoes, chemical burns on Ambers fingers, and a 6' x 8' carpet) this really is not a very cost effect hobby.